Pelican 1615AirTP Wheeled Hard Case with TrekPak Divider Insert System (Black)
Pelican™ Air Case
Pelican™ Air cases are the first in a series of remarkable innovations engineered by Pelican, the pioneers of protective cases. For over 40 years Pelican has designed and crafted the most influential protective cases in the world, and we're just getting started.
With the launch of the Pelican™ Air line of cases, we're redefining the future of protection with a remarkable union of light and tough.
Super-light proprietary HPX²™ Polymer
Business card holder
Automatic Purge Valve - Keeps water and dust out while balancing air pressure
This iteration of the black Pelican 1615AirWD Wheeled Hard Case is designed for you to maximize its available space while providing customized protection for your valuable gear. You get the lined 1615 case with a divider system insert designed by TrekPak that allows you to customize the organization of your gear and update it as your gear changes over time.
The waterproof 1615AirNF Wheeled Carry-On Hard Case in black from Pelican is a crushproof case made from lightweight HPX2 polymer that will protect and store sensitive gear. The case is secured with an updated push-button latching system on three sides that uses compressive force to tightly clamp the case shut. This edition of the 1615Air comes lined but without foam or other inserts, allowing you the freedom to completely customize the roomy 29.6 x 15.5 x 9.4" interior to your specific needs and gear. Carry your case using one of the three overmolded handles or if it's too heavy, extend the pull handle and tow it behind you on its two low-profile, quiet-running wheels.
Your case is made of a super-light proprietary HPX2 polymer with honeycomb structural elements, which is up to 40% lighter than most other Pelican polymers. Case design features include an O-ring that seals it to an IP67-rating to make it dust and waterproof, dual 5/16" (8mm) diameter stainless steel-reinforced padlock holes, and a pressure relief valve. This valve regulates the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop. For easy identification, there's a polycarbonate card holder that may be placed on the front or side of the case.
As with all bags and cases, check with your specific airline for the exact measurements of what they consider "carry-on" luggage before your flight.
Save space and reduce weight while organizing your gear to perfection with the TrekPak Divider Kit for Pelican 1615 Air Case. TrekPak uses pre-installed wall sections, divider panels, locking pins and tabs, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. The 7/16" thick divider sections are made of waterproof, closed-cell foam laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1" bottom foam and lid foam to give your gear 360° protection.
Your TrekPak Divider Kit includes two 30" dividers, two 16" dividers, two perimeter pieces, top and bottom foam, 30 pins and tabs, and a cutter tool.
Note:The middle inserts may require some cutting with the included cutter tool to better fit into the case.
Key Features
Waterproof, Crushproof & Lightweight
29.6 x 15.5 x 9.4" Interior Space
Made of Super-Light HPX2 Polymer
Updated Push-Button Latching System
Customizable TrekPak Divider Insert
Retractable Pull Handle & Wheels
IP67 Watertight O-Ring Gasket
Automatic Pressure Release Valve
1615AirTP,WL/TP INSERT,PB,BLACK
Pelican™ Air Case
Pelican™ Air cases are the first in a series of remarkable innovations engineered by Pelican, the pioneers of protective cases. For over 40 years Pelican has designed and crafted the most influential protective cases in the world, and we're just getting started.
With the launch of the Pelican™ Air line of cases, we're redefining the future of protection with a remarkable union of light and tough.
Super-light proprietary HPX²™ Polymer
Business card holder
Automatic Purge Valve - Keeps water and dust out while balancing air pressure
This iteration of the black Pelican 1615AirWD Wheeled Hard Case is designed for you to maximize its available space while providing customized protection for your valuable gear. You get the lined 1615 case with a divider system insert designed by TrekPak that allows you to customize the organization of your gear and update it as your gear changes over time.
The waterproof 1615AirNF Wheeled Carry-On Hard Case in black from Pelican is a crushproof case made from lightweight HPX2 polymer that will protect and store sensitive gear. The case is secured with an updated push-button latching system on three sides that uses compressive force to tightly clamp the case shut. This edition of the 1615Air comes lined but without foam or other inserts, allowing you the freedom to completely customize the roomy 29.6 x 15.5 x 9.4" interior to your specific needs and gear. Carry your case using one of the three overmolded handles or if it's too heavy, extend the pull handle and tow it behind you on its two low-profile, quiet-running wheels.
Your case is made of a super-light proprietary HPX2 polymer with honeycomb structural elements, which is up to 40% lighter than most other Pelican polymers. Case design features include an O-ring that seals it to an IP67-rating to make it dust and waterproof, dual 5/16" (8mm) diameter stainless steel-reinforced padlock holes, and a pressure relief valve. This valve regulates the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop. For easy identification, there's a polycarbonate card holder that may be placed on the front or side of the case.
As with all bags and cases, check with your specific airline for the exact measurements of what they consider "carry-on" luggage before your flight.
Save space and reduce weight while organizing your gear to perfection with the TrekPak Divider Kit for Pelican 1615 Air Case. TrekPak uses pre-installed wall sections, divider panels, locking pins and tabs, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. The 7/16" thick divider sections are made of waterproof, closed-cell foam laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1" bottom foam and lid foam to give your gear 360° protection.
Your TrekPak Divider Kit includes two 30" dividers, two 16" dividers, two perimeter pieces, top and bottom foam, 30 pins and tabs, and a cutter tool.
Note:The middle inserts may require some cutting with the included cutter tool to better fit into the case.
Key Features
Waterproof, Crushproof & Lightweight
29.6 x 15.5 x 9.4" Interior Space
Made of Super-Light HPX2 Polymer
Updated Push-Button Latching System
Customizable TrekPak Divider Insert
Retractable Pull Handle & Wheels
IP67 Watertight O-Ring Gasket
Automatic Pressure Release Valve
1615AirTP,WL/TP INSERT,PB,BLACK
Pelican™ Air Case
Pelican™ Air cases are the first in a series of remarkable innovations engineered by Pelican, the pioneers of protective cases. For over 40 years Pelican has designed and crafted the most influential protective cases in the world, and we're just getting started.
With the launch of the Pelican™ Air line of cases, we're redefining the future of protection with a remarkable union of light and tough.
Super-light proprietary HPX²™ Polymer
Business card holder
Automatic Purge Valve - Keeps water and dust out while balancing air pressure
This iteration of the black Pelican 1615AirWD Wheeled Hard Case is designed for you to maximize its available space while providing customized protection for your valuable gear. You get the lined 1615 case with a divider system insert designed by TrekPak that allows you to customize the organization of your gear and update it as your gear changes over time.
The waterproof 1615AirNF Wheeled Carry-On Hard Case in black from Pelican is a crushproof case made from lightweight HPX2 polymer that will protect and store sensitive gear. The case is secured with an updated push-button latching system on three sides that uses compressive force to tightly clamp the case shut. This edition of the 1615Air comes lined but without foam or other inserts, allowing you the freedom to completely customize the roomy 29.6 x 15.5 x 9.4" interior to your specific needs and gear. Carry your case using one of the three overmolded handles or if it's too heavy, extend the pull handle and tow it behind you on its two low-profile, quiet-running wheels.
Your case is made of a super-light proprietary HPX2 polymer with honeycomb structural elements, which is up to 40% lighter than most other Pelican polymers. Case design features include an O-ring that seals it to an IP67-rating to make it dust and waterproof, dual 5/16" (8mm) diameter stainless steel-reinforced padlock holes, and a pressure relief valve. This valve regulates the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop. For easy identification, there's a polycarbonate card holder that may be placed on the front or side of the case.
As with all bags and cases, check with your specific airline for the exact measurements of what they consider "carry-on" luggage before your flight.
Save space and reduce weight while organizing your gear to perfection with the TrekPak Divider Kit for Pelican 1615 Air Case. TrekPak uses pre-installed wall sections, divider panels, locking pins and tabs, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. The 7/16" thick divider sections are made of waterproof, closed-cell foam laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1" bottom foam and lid foam to give your gear 360° protection.
Your TrekPak Divider Kit includes two 30" dividers, two 16" dividers, two perimeter pieces, top and bottom foam, 30 pins and tabs, and a cutter tool.
Note:The middle inserts may require some cutting with the included cutter tool to better fit into the case.
Key Features
Waterproof, Crushproof & Lightweight
29.6 x 15.5 x 9.4" Interior Space
Made of Super-Light HPX2 Polymer
Updated Push-Button Latching System
Customizable TrekPak Divider Insert
Retractable Pull Handle & Wheels
IP67 Watertight O-Ring Gasket
Automatic Pressure Release Valve
1615AirTP,WL/TP INSERT,PB,BLACK