Pelican 1770 Protector Long Case (Black)
Pelican™ Protector Case™ Long Case
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Four extra-deep base-to-lid locking cleats that ensure maximum stacking stability
4-piece foam set
Wide-track polyurethane wheels with ball bearings and nylon hubs
Watertight, crushproof, and dustproof
Open cell core, polymer wall construction
Two Integrated Automatic Pressure Equalization Valves
Two rugged double-wide handles
Comfortable rubber over-molded side-carry handle
Stainless steel hardware and padlock protectors
O-ring seal
Also available from Pelican: The 1740 Long Case
Personalized nameplate service available
Lifetime Guarantee of Excellence
The black Pelican 1770 Protector Long Case provides up to 54.6 x 15.6 x 8.6" of capacity and is designed to protect its contents from impacts, moisture, or dirt. Its low-profile, built-in wheels, along with a rubberized wide-grip side handle allow for easy movement of heavy loads. For instances where this rolling case must be lifted off the ground, two additional rubberized handles are provided. Utilizing a polypropylene, ABS plastic, EPDM rubber, and stainless-steel construction, the Pelican 1770 Protector Long Case is MIL-STD-810G compliant. When closed, this rolling case's interior is sealed from dust, as well as water, while providing long-lasting resistance to wear-and-tear.
Each handle can be folded downward, helping to reduce the amount of space occupied by the Pelican 1770 Protector Long Case whether it is placed upright, or on its base. Four, molded cleats elevate the base, protecting it from wet and abrasive surfaces. While its lid faces upward, the rolling case's interior can be reached by opening the six latches along the lid. The base and lid are joined by four heavy-duty hinges, while the latches' double-hinged design prevents the Pelican 1770 Protector Long Case from accidentally opening due to bumps or shocks when in transit.
Both the base and lid also include a pair of shackle eyelets that align when closing the Pelican 1770 Protector Long Case. Two separately available padlocks with 1/4" diameter shackles can then be installed along the handles for enhanced security. While closed, two built-in valves automatically equalize air pressure between the interior and exterior of the rolling case. These pressure valves are water-resistant and further prevent the Pelican 1770 Protector Long Case from accidentally opening during air travel or when moving from areas of low altitude to high altitude.
Rolling case with up to 54.6 x 15.6 x 8.6" of capacity that is designed to protect its contents from impacts, moisture, or dirt
Utilizes a polypropylene, ABS plastic, EPDM rubber, and stainless-steel construction that is MIL-STD-810G compliant
Sealed from dust as well as water, while providing long-lasting resistance to wear-and-tear
Low-profile, built-in wheels, along with a rubberized wide-grip side handle allow for easy movement of heavy loads
Two additional rubberized handles for instances where the rolling case must be lifted off the ground
Handles fold away, reducing the amount of space occupied by the rolling case
Six, double-hinged latches prevent accidental opening due to bumps or shocks when in transport
Molded cleats elevate the rolling case's base, protecting it from surface moisture and abrasions
Cleats interlock with molded notches along the lid of another, closed Pelican 1770 Protector Long Case, allowing multiple Pelican 1770 Protector Long Cases to be safely stacked
Two built-in, water-resistant pressure valves further prevents the rolling case from accidentally opening during air travel or when moving from areas of low altitude to high altitude
Maintains buoyancy while holding up to 280 lb
Accommodates up to two separately available padlocks with 1/4" diameter shackles for enhanced security
Included, see-through Pelican 1630DC Document Container Accessory provides a see-through identification panel that can be used to display a contents label, or owner information along the rolling case's front
Key Features
Rigid Long Rolling Case
Dust, Water, and Impact Resistant
Buoyant with up to 280 lbs
3 Large Ergonomic Fold-Away Handles
Double-Hinge Latches, Padlock Compatible
2 Automatic Pressure Valves
Low-Profile Wheels
Exterior Document Container
With and without foam insert
Dimensions
Interior (L×W×D)
54.58 x 15.58 x 8.63 in (138.6 x 39.6 x 21.9 cm)
Exterior (L×W×D)
57.42 x 18.48 x 11.23 in (145.8 x 46.9 x 28.5 cm)
Pelican 1770NF,WL/NF,BLACK
Pelican™ Protector Case™ Long Case
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Four extra-deep base-to-lid locking cleats that ensure maximum stacking stability
4-piece foam set
Wide-track polyurethane wheels with ball bearings and nylon hubs
Watertight, crushproof, and dustproof
Open cell core, polymer wall construction
Two Integrated Automatic Pressure Equalization Valves
Two rugged double-wide handles
Comfortable rubber over-molded side-carry handle
Stainless steel hardware and padlock protectors
O-ring seal
Also available from Pelican: The 1740 Long Case
Personalized nameplate service available
Lifetime Guarantee of Excellence
The black Pelican 1770 Protector Long Case provides up to 54.6 x 15.6 x 8.6" of capacity and is designed to protect its contents from impacts, moisture, or dirt. Its low-profile, built-in wheels, along with a rubberized wide-grip side handle allow for easy movement of heavy loads. For instances where this rolling case must be lifted off the ground, two additional rubberized handles are provided. Utilizing a polypropylene, ABS plastic, EPDM rubber, and stainless-steel construction, the Pelican 1770 Protector Long Case is MIL-STD-810G compliant. When closed, this rolling case's interior is sealed from dust, as well as water, while providing long-lasting resistance to wear-and-tear.
Each handle can be folded downward, helping to reduce the amount of space occupied by the Pelican 1770 Protector Long Case whether it is placed upright, or on its base. Four, molded cleats elevate the base, protecting it from wet and abrasive surfaces. While its lid faces upward, the rolling case's interior can be reached by opening the six latches along the lid. The base and lid are joined by four heavy-duty hinges, while the latches' double-hinged design prevents the Pelican 1770 Protector Long Case from accidentally opening due to bumps or shocks when in transit.
Both the base and lid also include a pair of shackle eyelets that align when closing the Pelican 1770 Protector Long Case. Two separately available padlocks with 1/4" diameter shackles can then be installed along the handles for enhanced security. While closed, two built-in valves automatically equalize air pressure between the interior and exterior of the rolling case. These pressure valves are water-resistant and further prevent the Pelican 1770 Protector Long Case from accidentally opening during air travel or when moving from areas of low altitude to high altitude.
Rolling case with up to 54.6 x 15.6 x 8.6" of capacity that is designed to protect its contents from impacts, moisture, or dirt
Utilizes a polypropylene, ABS plastic, EPDM rubber, and stainless-steel construction that is MIL-STD-810G compliant
Sealed from dust as well as water, while providing long-lasting resistance to wear-and-tear
Low-profile, built-in wheels, along with a rubberized wide-grip side handle allow for easy movement of heavy loads
Two additional rubberized handles for instances where the rolling case must be lifted off the ground
Handles fold away, reducing the amount of space occupied by the rolling case
Six, double-hinged latches prevent accidental opening due to bumps or shocks when in transport
Molded cleats elevate the rolling case's base, protecting it from surface moisture and abrasions
Cleats interlock with molded notches along the lid of another, closed Pelican 1770 Protector Long Case, allowing multiple Pelican 1770 Protector Long Cases to be safely stacked
Two built-in, water-resistant pressure valves further prevents the rolling case from accidentally opening during air travel or when moving from areas of low altitude to high altitude
Maintains buoyancy while holding up to 280 lb
Accommodates up to two separately available padlocks with 1/4" diameter shackles for enhanced security
Included, see-through Pelican 1630DC Document Container Accessory provides a see-through identification panel that can be used to display a contents label, or owner information along the rolling case's front
Key Features
Rigid Long Rolling Case
Dust, Water, and Impact Resistant
Buoyant with up to 280 lbs
3 Large Ergonomic Fold-Away Handles
Double-Hinge Latches, Padlock Compatible
2 Automatic Pressure Valves
Low-Profile Wheels
Exterior Document Container
With and without foam insert
Dimensions
Interior (L×W×D)
54.58 x 15.58 x 8.63 in (138.6 x 39.6 x 21.9 cm)
Exterior (L×W×D)
57.42 x 18.48 x 11.23 in (145.8 x 46.9 x 28.5 cm)
Pelican 1770NF,WL/NF,BLACK
Pelican™ Protector Case™ Long Case
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Four extra-deep base-to-lid locking cleats that ensure maximum stacking stability
4-piece foam set
Wide-track polyurethane wheels with ball bearings and nylon hubs
Watertight, crushproof, and dustproof
Open cell core, polymer wall construction
Two Integrated Automatic Pressure Equalization Valves
Two rugged double-wide handles
Comfortable rubber over-molded side-carry handle
Stainless steel hardware and padlock protectors
O-ring seal
Also available from Pelican: The 1740 Long Case
Personalized nameplate service available
Lifetime Guarantee of Excellence
The black Pelican 1770 Protector Long Case provides up to 54.6 x 15.6 x 8.6" of capacity and is designed to protect its contents from impacts, moisture, or dirt. Its low-profile, built-in wheels, along with a rubberized wide-grip side handle allow for easy movement of heavy loads. For instances where this rolling case must be lifted off the ground, two additional rubberized handles are provided. Utilizing a polypropylene, ABS plastic, EPDM rubber, and stainless-steel construction, the Pelican 1770 Protector Long Case is MIL-STD-810G compliant. When closed, this rolling case's interior is sealed from dust, as well as water, while providing long-lasting resistance to wear-and-tear.
Each handle can be folded downward, helping to reduce the amount of space occupied by the Pelican 1770 Protector Long Case whether it is placed upright, or on its base. Four, molded cleats elevate the base, protecting it from wet and abrasive surfaces. While its lid faces upward, the rolling case's interior can be reached by opening the six latches along the lid. The base and lid are joined by four heavy-duty hinges, while the latches' double-hinged design prevents the Pelican 1770 Protector Long Case from accidentally opening due to bumps or shocks when in transit.
Both the base and lid also include a pair of shackle eyelets that align when closing the Pelican 1770 Protector Long Case. Two separately available padlocks with 1/4" diameter shackles can then be installed along the handles for enhanced security. While closed, two built-in valves automatically equalize air pressure between the interior and exterior of the rolling case. These pressure valves are water-resistant and further prevent the Pelican 1770 Protector Long Case from accidentally opening during air travel or when moving from areas of low altitude to high altitude.
Rolling case with up to 54.6 x 15.6 x 8.6" of capacity that is designed to protect its contents from impacts, moisture, or dirt
Utilizes a polypropylene, ABS plastic, EPDM rubber, and stainless-steel construction that is MIL-STD-810G compliant
Sealed from dust as well as water, while providing long-lasting resistance to wear-and-tear
Low-profile, built-in wheels, along with a rubberized wide-grip side handle allow for easy movement of heavy loads
Two additional rubberized handles for instances where the rolling case must be lifted off the ground
Handles fold away, reducing the amount of space occupied by the rolling case
Six, double-hinged latches prevent accidental opening due to bumps or shocks when in transport
Molded cleats elevate the rolling case's base, protecting it from surface moisture and abrasions
Cleats interlock with molded notches along the lid of another, closed Pelican 1770 Protector Long Case, allowing multiple Pelican 1770 Protector Long Cases to be safely stacked
Two built-in, water-resistant pressure valves further prevents the rolling case from accidentally opening during air travel or when moving from areas of low altitude to high altitude
Maintains buoyancy while holding up to 280 lb
Accommodates up to two separately available padlocks with 1/4" diameter shackles for enhanced security
Included, see-through Pelican 1630DC Document Container Accessory provides a see-through identification panel that can be used to display a contents label, or owner information along the rolling case's front
Key Features
Rigid Long Rolling Case
Dust, Water, and Impact Resistant
Buoyant with up to 280 lbs
3 Large Ergonomic Fold-Away Handles
Double-Hinge Latches, Padlock Compatible
2 Automatic Pressure Valves
Low-Profile Wheels
Exterior Document Container
With and without foam insert
Dimensions
Interior (L×W×D)
54.58 x 15.58 x 8.63 in (138.6 x 39.6 x 21.9 cm)
Exterior (L×W×D)
57.42 x 18.48 x 11.23 in (145.8 x 46.9 x 28.5 cm)
Pelican 1770NF,WL/NF,BLACK