Pelican 1650TP Case with TrekPak Divider System (Black)
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
4 strong polyurethane wheels with stainless steel bearings
2 level Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Retractable extension handle
Fold down handles
Easy open Double Throw latches
Stainless steel hardware and padlock protectors
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Personalized nameplate service available
The black Pelican 1650TP Case with TrekPak Divider System is an unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion proof hard case that can be used to carry and protect your equipment from the elements. It is made with ultra high-impact structural copolymer for strength and durability. It has a 0.25" neoprene O-ring, ABS latches, and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.
The case can be carried with the top handle or the oversized side handle, or you can roll it via the retractable extension handle and strong polyurethane wheels. It has a release latch for the extension handle and padlock protectors provide added strength and extra security against cutting and theft.
This case has a four-piece foam set interior.
Construction
Ultra high-impact structural copolymer
Watertight, crush, and dustproof
Open-cell core with solid wall design
Easy-open double-throw latches
Stainless-steel padlock protectors
O-ring seal
Automatic pressure equalization valve
Stainless-steel hardware
TrekPak insert with two perimeter pieces, two 18" dividers, two 28" dividers, cutter tool, 30 pins with 30 red pull tabs, plus a top and bottom foam piece.
Temperature rating -10 to 210°F / -23 to 99°C
Carrying / Rolling Options
Top handle
Oversized folding handle
Retractable extension handle
4 polyurethane wheels with stainless-steel bearings
1650 Certificates
IP67 (3.3' / 1m submersion for 30 minutes)
Def Stan 81-41/STANAG 4280
Key Features
Unbreakable, Watertight, Hard Case
Ultra High-Impact Structural Copolymer
TrekPak Divider System Included
Built-In Automatic Purge Valve
Watertight to 30'
Oversize Folding Handle
Top Handle
Retractable Extension Handle
Built-In Wheels
Dimensions
Interior (L×W×D)
28.57 x 17.52 x 10.65 in (72.6 x 44.5 x 27.1 cm)
Exterior (L×W×D)
31.59 x 20.47 x 12.45 in (80.2 x 52 x 31.6 cm)
elican 1650TP,WL/TP INSERT,BLACK
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
4 strong polyurethane wheels with stainless steel bearings
2 level Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Retractable extension handle
Fold down handles
Easy open Double Throw latches
Stainless steel hardware and padlock protectors
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Personalized nameplate service available
The black Pelican 1650TP Case with TrekPak Divider System is an unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion proof hard case that can be used to carry and protect your equipment from the elements. It is made with ultra high-impact structural copolymer for strength and durability. It has a 0.25" neoprene O-ring, ABS latches, and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.
The case can be carried with the top handle or the oversized side handle, or you can roll it via the retractable extension handle and strong polyurethane wheels. It has a release latch for the extension handle and padlock protectors provide added strength and extra security against cutting and theft.
This case has a four-piece foam set interior.
Construction
Ultra high-impact structural copolymer
Watertight, crush, and dustproof
Open-cell core with solid wall design
Easy-open double-throw latches
Stainless-steel padlock protectors
O-ring seal
Automatic pressure equalization valve
Stainless-steel hardware
TrekPak insert with two perimeter pieces, two 18" dividers, two 28" dividers, cutter tool, 30 pins with 30 red pull tabs, plus a top and bottom foam piece.
Temperature rating -10 to 210°F / -23 to 99°C
Carrying / Rolling Options
Top handle
Oversized folding handle
Retractable extension handle
4 polyurethane wheels with stainless-steel bearings
1650 Certificates
IP67 (3.3' / 1m submersion for 30 minutes)
Def Stan 81-41/STANAG 4280
Key Features
Unbreakable, Watertight, Hard Case
Ultra High-Impact Structural Copolymer
TrekPak Divider System Included
Built-In Automatic Purge Valve
Watertight to 30'
Oversize Folding Handle
Top Handle
Retractable Extension Handle
Built-In Wheels
Dimensions
Interior (L×W×D)
28.57 x 17.52 x 10.65 in (72.6 x 44.5 x 27.1 cm)
Exterior (L×W×D)
31.59 x 20.47 x 12.45 in (80.2 x 52 x 31.6 cm)
elican 1650TP,WL/TP INSERT,BLACK
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
4 strong polyurethane wheels with stainless steel bearings
2 level Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Retractable extension handle
Fold down handles
Easy open Double Throw latches
Stainless steel hardware and padlock protectors
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Personalized nameplate service available
The black Pelican 1650TP Case with TrekPak Divider System is an unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion proof hard case that can be used to carry and protect your equipment from the elements. It is made with ultra high-impact structural copolymer for strength and durability. It has a 0.25" neoprene O-ring, ABS latches, and includes an automatic purge valve for quick equalization after changes in atmospheric pressure.
The case can be carried with the top handle or the oversized side handle, or you can roll it via the retractable extension handle and strong polyurethane wheels. It has a release latch for the extension handle and padlock protectors provide added strength and extra security against cutting and theft.
This case has a four-piece foam set interior.
Construction
Ultra high-impact structural copolymer
Watertight, crush, and dustproof
Open-cell core with solid wall design
Easy-open double-throw latches
Stainless-steel padlock protectors
O-ring seal
Automatic pressure equalization valve
Stainless-steel hardware
TrekPak insert with two perimeter pieces, two 18" dividers, two 28" dividers, cutter tool, 30 pins with 30 red pull tabs, plus a top and bottom foam piece.
Temperature rating -10 to 210°F / -23 to 99°C
Carrying / Rolling Options
Top handle
Oversized folding handle
Retractable extension handle
4 polyurethane wheels with stainless-steel bearings
1650 Certificates
IP67 (3.3' / 1m submersion for 30 minutes)
Def Stan 81-41/STANAG 4280
Key Features
Unbreakable, Watertight, Hard Case
Ultra High-Impact Structural Copolymer
TrekPak Divider System Included
Built-In Automatic Purge Valve
Watertight to 30'
Oversize Folding Handle
Top Handle
Retractable Extension Handle
Built-In Wheels
Dimensions
Interior (L×W×D)
28.57 x 17.52 x 10.65 in (72.6 x 44.5 x 27.1 cm)
Exterior (L×W×D)
31.59 x 20.47 x 12.45 in (80.2 x 52 x 31.6 cm)
elican 1650TP,WL/TP INSERT,BLACK