Pelican 0370 24" Cube Case with Foam (Black)
Pelican™ Protector Case™ Cube Case
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Large 2-person fold down handles
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
3 level Pick N Pluck™ with convoluted lid foam
Stainless steel hardware and padlock protectors
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Personalized nameplate service available
Lifetime Guarantee of Excellence
The Pelican 0370 24" Cube Case with Foam (Black) is an extra-deep watertight, airtight, dustproof, crushproof case. The case is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has oversized haul handles on each side, which allows two people to use two hands on each handle to lift and carry heavy loads. The case is closed by six ABS double throw latches (two on each side and two in front), maintaining a watertight seal. The cube case is stackable for convenient storage.
This case has a seven piece foam set included.
Unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a seven-piece foam set that consists of one "egg crate" foam upper section, 1.5" blank section behind it, three Pick 'N Pluck foam sections, and two 1" thick blank bottom foam sections
Built-in purge valve for changes in altitude or temperature
Temperature rating -10 to +210° F (-23 to +99° C)
Closed with six easy-open double throw latches (two on each side and two in front)
Stainless steel hasp protectors
Carrying options
Oversized handles enables two people to use two hands on each handle to carry heavy loads
A 0357 Mobility Kit (four steel casters with nylon wheels and a pull strap) is available as an accessory
Stackable for convenient storage
Key Features
Watertight, Dustproof Case
Made of Ultra High Impact Copolymer
Seven Piece Foam Set
Built-in Pressure Equalization Valve
Six Double Throw Latches
Padlock Protectors
Two Oversized Haul Handle
Dimensions
Interior (L×W×D)
24.00 x 24.00 x 24.00 in (61 x 61 x 61 cm)
Exterior (L×W×D)
26.50 x 26.50 x 25.25 in (67.3 x 67.3 x 64.1 cm)
Pelican 0370,WL/WF,BLACK
Pelican™ Protector Case™ Cube Case
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Large 2-person fold down handles
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
3 level Pick N Pluck™ with convoluted lid foam
Stainless steel hardware and padlock protectors
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Personalized nameplate service available
Lifetime Guarantee of Excellence
The Pelican 0370 24" Cube Case with Foam (Black) is an extra-deep watertight, airtight, dustproof, crushproof case. The case is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has oversized haul handles on each side, which allows two people to use two hands on each handle to lift and carry heavy loads. The case is closed by six ABS double throw latches (two on each side and two in front), maintaining a watertight seal. The cube case is stackable for convenient storage.
This case has a seven piece foam set included.
Unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a seven-piece foam set that consists of one "egg crate" foam upper section, 1.5" blank section behind it, three Pick 'N Pluck foam sections, and two 1" thick blank bottom foam sections
Built-in purge valve for changes in altitude or temperature
Temperature rating -10 to +210° F (-23 to +99° C)
Closed with six easy-open double throw latches (two on each side and two in front)
Stainless steel hasp protectors
Carrying options
Oversized handles enables two people to use two hands on each handle to carry heavy loads
A 0357 Mobility Kit (four steel casters with nylon wheels and a pull strap) is available as an accessory
Stackable for convenient storage
Key Features
Watertight, Dustproof Case
Made of Ultra High Impact Copolymer
Seven Piece Foam Set
Built-in Pressure Equalization Valve
Six Double Throw Latches
Padlock Protectors
Two Oversized Haul Handle
Dimensions
Interior (L×W×D)
24.00 x 24.00 x 24.00 in (61 x 61 x 61 cm)
Exterior (L×W×D)
26.50 x 26.50 x 25.25 in (67.3 x 67.3 x 64.1 cm)
Pelican 0370,WL/WF,BLACK
Pelican™ Protector Case™ Cube Case
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Large 2-person fold down handles
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
3 level Pick N Pluck™ with convoluted lid foam
Stainless steel hardware and padlock protectors
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Personalized nameplate service available
Lifetime Guarantee of Excellence
The Pelican 0370 24" Cube Case with Foam (Black) is an extra-deep watertight, airtight, dustproof, crushproof case. The case is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It has oversized haul handles on each side, which allows two people to use two hands on each handle to lift and carry heavy loads. The case is closed by six ABS double throw latches (two on each side and two in front), maintaining a watertight seal. The cube case is stackable for convenient storage.
This case has a seven piece foam set included.
Unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Includes a seven-piece foam set that consists of one "egg crate" foam upper section, 1.5" blank section behind it, three Pick 'N Pluck foam sections, and two 1" thick blank bottom foam sections
Built-in purge valve for changes in altitude or temperature
Temperature rating -10 to +210° F (-23 to +99° C)
Closed with six easy-open double throw latches (two on each side and two in front)
Stainless steel hasp protectors
Carrying options
Oversized handles enables two people to use two hands on each handle to carry heavy loads
A 0357 Mobility Kit (four steel casters with nylon wheels and a pull strap) is available as an accessory
Stackable for convenient storage
Key Features
Watertight, Dustproof Case
Made of Ultra High Impact Copolymer
Seven Piece Foam Set
Built-in Pressure Equalization Valve
Six Double Throw Latches
Padlock Protectors
Two Oversized Haul Handle
Dimensions
Interior (L×W×D)
24.00 x 24.00 x 24.00 in (61 x 61 x 61 cm)
Exterior (L×W×D)
26.50 x 26.50 x 25.25 in (67.3 x 67.3 x 64.1 cm)
Pelican 0370,WL/WF,BLACK