Pelican 0350 Cube Case with Foam (Black)
Pelican™ Protector Case™ Cube Case
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Large 2-person fold down handles
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
3 level Pick N Pluck™ with convoluted lid foam
Stainless steel hardware and padlock protectors
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Personalized nameplate service available
Lifetime Guarantee of Excellence
The Pelican 0350 Cube Case with Foam (Black) is extra deep, unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. It is made from Ultra High Impact structural copolymer that makes it extremely strong and durable. The case is closed by 6 double ABS latches (2 on each side and 2 in front) to maintain a watertight seal. There is an automatic pressure equalization valve, 6 easy open double throw latches and padlock protectors. The 0350 Cube Case is carried by 2 large 2-person fold down handles.
This case has a seven-piece foam set included.
Construction
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Open cell core with solid wall design
O-ring seal
Automatic pressure equalization valve
Six easy open double throw latches
Padlock protectors
Stainless steel hardware
Seven-piece foam set consisting of 1 convoluted top lid foam, 1 solid top lid foam, 1center foam section, 3 "Pick and Pluck" foam sections and 1 bottom foam base pad
Temperature rating -40 to +210°F (-40 to +99°C)
Large 2-person fold down handles
0340 Case Certificates
IP67 (1 meter submersion for 30 minutes) (Ingress Protection)
Def Stan 81-41/STANAG 4280
Personalized nameplate service available
Key Features
Watertight, Dustproof Case
Made of Ultra High Impact Copolymer
Seven-piece Foam Set Interior
Automatic Pressure Equalization Valves
Six Easy Open Double Throw Latches
Padlock Protectors
2-person Fold Down Handles
Dimensions
Interior (L×W×D)
20.00 x 20.00 x 20.00 in (50.8 x 50.8 x 50.8 cm)
Exterior (L×W×D)
22.50 x 22.43 x 21.25 in (57.2 x 57 x 54 cm)
Pelican 0350,WL/WF,BLACK
Pelican™ Protector Case™ Cube Case
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Large 2-person fold down handles
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
3 level Pick N Pluck™ with convoluted lid foam
Stainless steel hardware and padlock protectors
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Personalized nameplate service available
Lifetime Guarantee of Excellence
The Pelican 0350 Cube Case with Foam (Black) is extra deep, unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. It is made from Ultra High Impact structural copolymer that makes it extremely strong and durable. The case is closed by 6 double ABS latches (2 on each side and 2 in front) to maintain a watertight seal. There is an automatic pressure equalization valve, 6 easy open double throw latches and padlock protectors. The 0350 Cube Case is carried by 2 large 2-person fold down handles.
This case has a seven-piece foam set included.
Construction
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Open cell core with solid wall design
O-ring seal
Automatic pressure equalization valve
Six easy open double throw latches
Padlock protectors
Stainless steel hardware
Seven-piece foam set consisting of 1 convoluted top lid foam, 1 solid top lid foam, 1center foam section, 3 "Pick and Pluck" foam sections and 1 bottom foam base pad
Temperature rating -40 to +210°F (-40 to +99°C)
Large 2-person fold down handles
0340 Case Certificates
IP67 (1 meter submersion for 30 minutes) (Ingress Protection)
Def Stan 81-41/STANAG 4280
Personalized nameplate service available
Key Features
Watertight, Dustproof Case
Made of Ultra High Impact Copolymer
Seven-piece Foam Set Interior
Automatic Pressure Equalization Valves
Six Easy Open Double Throw Latches
Padlock Protectors
2-person Fold Down Handles
Dimensions
Interior (L×W×D)
20.00 x 20.00 x 20.00 in (50.8 x 50.8 x 50.8 cm)
Exterior (L×W×D)
22.50 x 22.43 x 21.25 in (57.2 x 57 x 54 cm)
Pelican 0350,WL/WF,BLACK
Pelican™ Protector Case™ Cube Case
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Large 2-person fold down handles
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
3 level Pick N Pluck™ with convoluted lid foam
Stainless steel hardware and padlock protectors
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Personalized nameplate service available
Lifetime Guarantee of Excellence
The Pelican 0350 Cube Case with Foam (Black) is extra deep, unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof. It is made from Ultra High Impact structural copolymer that makes it extremely strong and durable. The case is closed by 6 double ABS latches (2 on each side and 2 in front) to maintain a watertight seal. There is an automatic pressure equalization valve, 6 easy open double throw latches and padlock protectors. The 0350 Cube Case is carried by 2 large 2-person fold down handles.
This case has a seven-piece foam set included.
Construction
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
Made of Ultra High Impact structural copolymer that makes it extremely strong and durable
Open cell core with solid wall design
O-ring seal
Automatic pressure equalization valve
Six easy open double throw latches
Padlock protectors
Stainless steel hardware
Seven-piece foam set consisting of 1 convoluted top lid foam, 1 solid top lid foam, 1center foam section, 3 "Pick and Pluck" foam sections and 1 bottom foam base pad
Temperature rating -40 to +210°F (-40 to +99°C)
Large 2-person fold down handles
0340 Case Certificates
IP67 (1 meter submersion for 30 minutes) (Ingress Protection)
Def Stan 81-41/STANAG 4280
Personalized nameplate service available
Key Features
Watertight, Dustproof Case
Made of Ultra High Impact Copolymer
Seven-piece Foam Set Interior
Automatic Pressure Equalization Valves
Six Easy Open Double Throw Latches
Padlock Protectors
2-person Fold Down Handles
Dimensions
Interior (L×W×D)
20.00 x 20.00 x 20.00 in (50.8 x 50.8 x 50.8 cm)
Exterior (L×W×D)
22.50 x 22.43 x 21.25 in (57.2 x 57 x 54 cm)
Pelican 0350,WL/WF,BLACK