Pelican 1550TP Case with TrekPak Divider System (Black)
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Stainless steel hardware
Lifetime Guarantee of Excellence
The Pelican 1550TP Case with TrekPak Divider System (Black) is an unbreakable, watertight, airtight, chemical-resistant, corrosion, and dustproof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer for strength and durability. It includes a 0.25" neoprene O-ring, easy-open double-throw latches that seal perfectly, and an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has a comfortable rubber overmolded handle.
The TrekPak Divider System is lighter than traditional padded dividers, uses preinstalled wall sections, and has divider panels, locking pins, plus an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for when your equipment requirements vary. 7/16" thick divider sections are made with waterproof, closed-cell foam laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1" bottom foam and lid foam to give your gear 360-degree protection. The 1550TP case has the following certificates: IP67 (Ingress Protection) = 1-meter submersion for 30 minutes, MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280 and ATA 300 specifications for transit cases.
Unbreakable, watertight, airtight, chemical-resistant, corrosion, and dustproof case
TrekPak insert with 2 perimeter pieces, 2 (13") divider strips, 2 (23") divider strips, cutter tool, 20 pins with 20 red pull tabs, plus a top and bottom foam piece.
Made of Ultra-High Impact structural copolymer polypropylene and an open-cell core with solid wall design, which makes the case strong and lightweight
Easy-open double-throw latches with padlock protectors
0.25" (6.4 mm) neoprene O-ring seal
Comfortable rubber overmolded handle
Automatic pressure equalization valve for changes in altitude or temperature
1550 Case Certificates
IP67 (Ingress Protection) = 1-meter submersion for 30 minutes
MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280
ATA 300 specifications for transit cases
Temperature rating -10 to +210° F (-23 to +99° C)
Key Features
Watertight, Dustproof Case
Made of Ultra-High Impact Copolymer
Easy-Open Double-Throw Latches
Padlock Protectors
Automatic Pressure Equalization Valve
Dimensions
Interior (L×W×D)
18.63 x 14.18 x 7.72 in (47.3 x 36 x 19.6 cm)
Exterior (L×W×D)
20.66 x 17.20 x 8.40 in (52.5 x 43.7 x 21.3 cm)
Pelican 1550TP,WL/TP INSERT,BLACK
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Stainless steel hardware
Lifetime Guarantee of Excellence
The Pelican 1550TP Case with TrekPak Divider System (Black) is an unbreakable, watertight, airtight, chemical-resistant, corrosion, and dustproof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer for strength and durability. It includes a 0.25" neoprene O-ring, easy-open double-throw latches that seal perfectly, and an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has a comfortable rubber overmolded handle.
The TrekPak Divider System is lighter than traditional padded dividers, uses preinstalled wall sections, and has divider panels, locking pins, plus an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for when your equipment requirements vary. 7/16" thick divider sections are made with waterproof, closed-cell foam laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1" bottom foam and lid foam to give your gear 360-degree protection. The 1550TP case has the following certificates: IP67 (Ingress Protection) = 1-meter submersion for 30 minutes, MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280 and ATA 300 specifications for transit cases.
Unbreakable, watertight, airtight, chemical-resistant, corrosion, and dustproof case
TrekPak insert with 2 perimeter pieces, 2 (13") divider strips, 2 (23") divider strips, cutter tool, 20 pins with 20 red pull tabs, plus a top and bottom foam piece.
Made of Ultra-High Impact structural copolymer polypropylene and an open-cell core with solid wall design, which makes the case strong and lightweight
Easy-open double-throw latches with padlock protectors
0.25" (6.4 mm) neoprene O-ring seal
Comfortable rubber overmolded handle
Automatic pressure equalization valve for changes in altitude or temperature
1550 Case Certificates
IP67 (Ingress Protection) = 1-meter submersion for 30 minutes
MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280
ATA 300 specifications for transit cases
Temperature rating -10 to +210° F (-23 to +99° C)
Key Features
Watertight, Dustproof Case
Made of Ultra-High Impact Copolymer
Easy-Open Double-Throw Latches
Padlock Protectors
Automatic Pressure Equalization Valve
Dimensions
Interior (L×W×D)
18.63 x 14.18 x 7.72 in (47.3 x 36 x 19.6 cm)
Exterior (L×W×D)
20.66 x 17.20 x 8.40 in (52.5 x 43.7 x 21.3 cm)
Pelican 1550TP,WL/TP INSERT,BLACK
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Stainless steel hardware
Lifetime Guarantee of Excellence
The Pelican 1550TP Case with TrekPak Divider System (Black) is an unbreakable, watertight, airtight, chemical-resistant, corrosion, and dustproof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer for strength and durability. It includes a 0.25" neoprene O-ring, easy-open double-throw latches that seal perfectly, and an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has a comfortable rubber overmolded handle.
The TrekPak Divider System is lighter than traditional padded dividers, uses preinstalled wall sections, and has divider panels, locking pins, plus an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for when your equipment requirements vary. 7/16" thick divider sections are made with waterproof, closed-cell foam laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1" bottom foam and lid foam to give your gear 360-degree protection. The 1550TP case has the following certificates: IP67 (Ingress Protection) = 1-meter submersion for 30 minutes, MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280 and ATA 300 specifications for transit cases.
Unbreakable, watertight, airtight, chemical-resistant, corrosion, and dustproof case
TrekPak insert with 2 perimeter pieces, 2 (13") divider strips, 2 (23") divider strips, cutter tool, 20 pins with 20 red pull tabs, plus a top and bottom foam piece.
Made of Ultra-High Impact structural copolymer polypropylene and an open-cell core with solid wall design, which makes the case strong and lightweight
Easy-open double-throw latches with padlock protectors
0.25" (6.4 mm) neoprene O-ring seal
Comfortable rubber overmolded handle
Automatic pressure equalization valve for changes in altitude or temperature
1550 Case Certificates
IP67 (Ingress Protection) = 1-meter submersion for 30 minutes
MIL C-4150J (Military Standard), Defense Standard 81-41/STANAG4280
ATA 300 specifications for transit cases
Temperature rating -10 to +210° F (-23 to +99° C)
Key Features
Watertight, Dustproof Case
Made of Ultra-High Impact Copolymer
Easy-Open Double-Throw Latches
Padlock Protectors
Automatic Pressure Equalization Valve
Dimensions
Interior (L×W×D)
18.63 x 14.18 x 7.72 in (47.3 x 36 x 19.6 cm)
Exterior (L×W×D)
20.66 x 17.20 x 8.40 in (52.5 x 43.7 x 21.3 cm)
Pelican 1550TP,WL/TP INSERT,BLACK