Pelican 1524 Waterproof 1520 Case with Padded Dividers (Black)
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Stainless steel hardware
Lifetime Guarantee of Excellence
The Pelican 1524 Watertight 1520 Case with Dividers (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer, which makes it extremely strong and durable. It includes a 0.25" / 6.4mm neoprene O-ring, ABS latches that seal perfectly, and an automatic purge valve for quick equalization after changes in atmospheric pressure.
The 1524 case meets ATA standards for transit cases, is NATO-codified, and is tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).
This case includes a 15-piece padded and flexible divider set.
Unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof case
Made of Ultra-High Impact structural copolymer that makes it extremely strong and durable
Includes a 15-piece padded divider set consisting of one tray, four long, 10 short padded and flexible dividers
Built-in automatic pressure equalization valve for changes in altitude or temperature
Temperature rating -10 to +210°F / -23 to +99°C
Easy open Double-Throw latches
Stainless steel hardware
Padlock protectors provide added strength and extra security against cutting and theft
Comfortable rubber over-molded handle
1520 Case Certificates
IP67 (3.3' / 1m submersion for 30 minutes) (Ingress Protection)
MIL C-4150J (Military Standard)
Def Stan 81-41/STANAG 4280
Key Features
Watertight, Dustproof Case
Made of Ultra-High Impact Copolymer
15-Piece Divider Set is Included
Built-In Pressure Equalization Valve
Two Double-Throw Latches
Padlock Protectors
Rubber Over-Molded Handle
Dimensions
Interior (L×W×D)
18.06 x 12.89 x 6.72 in (45.9 x 32.7 x 17.1 cm)
Exterior (L×W×D)
19.78 x 15.77 x 7.41 in (50.2 x 40.1 x 18.8 cm)
Pelican 1524,WL/WD,BLACK
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Stainless steel hardware
Lifetime Guarantee of Excellence
The Pelican 1524 Watertight 1520 Case with Dividers (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer, which makes it extremely strong and durable. It includes a 0.25" / 6.4mm neoprene O-ring, ABS latches that seal perfectly, and an automatic purge valve for quick equalization after changes in atmospheric pressure.
The 1524 case meets ATA standards for transit cases, is NATO-codified, and is tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).
This case includes a 15-piece padded and flexible divider set.
Unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof case
Made of Ultra-High Impact structural copolymer that makes it extremely strong and durable
Includes a 15-piece padded divider set consisting of one tray, four long, 10 short padded and flexible dividers
Built-in automatic pressure equalization valve for changes in altitude or temperature
Temperature rating -10 to +210°F / -23 to +99°C
Easy open Double-Throw latches
Stainless steel hardware
Padlock protectors provide added strength and extra security against cutting and theft
Comfortable rubber over-molded handle
1520 Case Certificates
IP67 (3.3' / 1m submersion for 30 minutes) (Ingress Protection)
MIL C-4150J (Military Standard)
Def Stan 81-41/STANAG 4280
Key Features
Watertight, Dustproof Case
Made of Ultra-High Impact Copolymer
15-Piece Divider Set is Included
Built-In Pressure Equalization Valve
Two Double-Throw Latches
Padlock Protectors
Rubber Over-Molded Handle
Dimensions
Interior (L×W×D)
18.06 x 12.89 x 6.72 in (45.9 x 32.7 x 17.1 cm)
Exterior (L×W×D)
19.78 x 15.77 x 7.41 in (50.2 x 40.1 x 18.8 cm)
Pelican 1524,WL/WD,BLACK
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Stainless steel hardware
Lifetime Guarantee of Excellence
The Pelican 1524 Watertight 1520 Case with Dividers (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-High Impact structural copolymer, which makes it extremely strong and durable. It includes a 0.25" / 6.4mm neoprene O-ring, ABS latches that seal perfectly, and an automatic purge valve for quick equalization after changes in atmospheric pressure.
The 1524 case meets ATA standards for transit cases, is NATO-codified, and is tested to MIL C-4150J (Military Standard) and IP-67 (Ingress Protection).
This case includes a 15-piece padded and flexible divider set.
Unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof case
Made of Ultra-High Impact structural copolymer that makes it extremely strong and durable
Includes a 15-piece padded divider set consisting of one tray, four long, 10 short padded and flexible dividers
Built-in automatic pressure equalization valve for changes in altitude or temperature
Temperature rating -10 to +210°F / -23 to +99°C
Easy open Double-Throw latches
Stainless steel hardware
Padlock protectors provide added strength and extra security against cutting and theft
Comfortable rubber over-molded handle
1520 Case Certificates
IP67 (3.3' / 1m submersion for 30 minutes) (Ingress Protection)
MIL C-4150J (Military Standard)
Def Stan 81-41/STANAG 4280
Key Features
Watertight, Dustproof Case
Made of Ultra-High Impact Copolymer
15-Piece Divider Set is Included
Built-In Pressure Equalization Valve
Two Double-Throw Latches
Padlock Protectors
Rubber Over-Molded Handle
Dimensions
Interior (L×W×D)
18.06 x 12.89 x 6.72 in (45.9 x 32.7 x 17.1 cm)
Exterior (L×W×D)
19.78 x 15.77 x 7.41 in (50.2 x 40.1 x 18.8 cm)
Pelican 1524,WL/WD,BLACK