Pelican 1447 Top Loader 1440 Case with Office Divider (Black)
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Stainless steel hardware
Lifetime Guarantee of Excellence
The Pelican 1447 Top Loader 1440 Case with Office Divider (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-high Impact structural copolymer that makes it extremely strong and durable. It includes a 0.25" (6.4mm) neoprene o-ring, ABS latches that seal perfectly, and an automatic purge valve for quick equalization after changes in atmospheric pressure. The case has a steel-reinforced lock hasp protector, and is carried by a folding handle, or by a retractable handle and two built-in polyurethane wheels.
This case includes an office divider set and lid organizer.
Construction
Ultra-high Impact structural copolymer
Watertight, crushproof, and dustproof
Office divider set interior
Mesh zipper cover on the top to keep contents in place
Open cell core with solid wall design
Stainless steel hardware
Utility divider set consists of top tray with 1 (15") and 6 (3.0") flexible dividers, and a lower tray with 1 (15") and 3 (3.5") flexible padded dividers
The lid organizer has numerous pockets for accessories
Top load design gives easy access to all the gear
Built-in Pressure Equalization Valve for changes in altitude or temperature
Temperature rating -10 to +210°F (-23 to +99°C)
Easy open double throw latches
Stainless steel reinforced hasp protector
Carrying options;
Folding rubber over-molded handle
Retractable extension handle
Two strong polyurethane wheels with stainless steel bearings
Certifications
IP67 (1 meter submersion for 30 minutes)
Def Stan 81-41/STANAG 4280
Key Features
Watertight, Dustproof Case
Made of Ultra-high Impact Copolymer
Office Divider Interior
Automatic Pressure Equalization Valve
Easy Open Double Throw Latches
Steel Reinforced Lock Hasp Protector
Rubber Over-molded Folding Handle
Retractable Extension Handle
Built-in Wheels
Dimensions
Interior (L×W×D)
17.10 x 7.50 x 16.00 in (43.4 x 19.1 x 40.6 cm)
Exterior (L×W×D)
19.70 x 12.00 x 18.00 in (50 x 30.5 x 45.7 cm)
Pelican 1447,WL/WD&ORG-OFFICE,BK
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Stainless steel hardware
Lifetime Guarantee of Excellence
The Pelican 1447 Top Loader 1440 Case with Office Divider (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-high Impact structural copolymer that makes it extremely strong and durable. It includes a 0.25" (6.4mm) neoprene o-ring, ABS latches that seal perfectly, and an automatic purge valve for quick equalization after changes in atmospheric pressure. The case has a steel-reinforced lock hasp protector, and is carried by a folding handle, or by a retractable handle and two built-in polyurethane wheels.
This case includes an office divider set and lid organizer.
Construction
Ultra-high Impact structural copolymer
Watertight, crushproof, and dustproof
Office divider set interior
Mesh zipper cover on the top to keep contents in place
Open cell core with solid wall design
Stainless steel hardware
Utility divider set consists of top tray with 1 (15") and 6 (3.0") flexible dividers, and a lower tray with 1 (15") and 3 (3.5") flexible padded dividers
The lid organizer has numerous pockets for accessories
Top load design gives easy access to all the gear
Built-in Pressure Equalization Valve for changes in altitude or temperature
Temperature rating -10 to +210°F (-23 to +99°C)
Easy open double throw latches
Stainless steel reinforced hasp protector
Carrying options;
Folding rubber over-molded handle
Retractable extension handle
Two strong polyurethane wheels with stainless steel bearings
Certifications
IP67 (1 meter submersion for 30 minutes)
Def Stan 81-41/STANAG 4280
Key Features
Watertight, Dustproof Case
Made of Ultra-high Impact Copolymer
Office Divider Interior
Automatic Pressure Equalization Valve
Easy Open Double Throw Latches
Steel Reinforced Lock Hasp Protector
Rubber Over-molded Folding Handle
Retractable Extension Handle
Built-in Wheels
Dimensions
Interior (L×W×D)
17.10 x 7.50 x 16.00 in (43.4 x 19.1 x 40.6 cm)
Exterior (L×W×D)
19.70 x 12.00 x 18.00 in (50 x 30.5 x 45.7 cm)
Pelican 1447,WL/WD&ORG-OFFICE,BK
Pelican™ Protector Case™
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Stainless steel hardware
Lifetime Guarantee of Excellence
The Pelican 1447 Top Loader 1440 Case with Office Divider (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra-high Impact structural copolymer that makes it extremely strong and durable. It includes a 0.25" (6.4mm) neoprene o-ring, ABS latches that seal perfectly, and an automatic purge valve for quick equalization after changes in atmospheric pressure. The case has a steel-reinforced lock hasp protector, and is carried by a folding handle, or by a retractable handle and two built-in polyurethane wheels.
This case includes an office divider set and lid organizer.
Construction
Ultra-high Impact structural copolymer
Watertight, crushproof, and dustproof
Office divider set interior
Mesh zipper cover on the top to keep contents in place
Open cell core with solid wall design
Stainless steel hardware
Utility divider set consists of top tray with 1 (15") and 6 (3.0") flexible dividers, and a lower tray with 1 (15") and 3 (3.5") flexible padded dividers
The lid organizer has numerous pockets for accessories
Top load design gives easy access to all the gear
Built-in Pressure Equalization Valve for changes in altitude or temperature
Temperature rating -10 to +210°F (-23 to +99°C)
Easy open double throw latches
Stainless steel reinforced hasp protector
Carrying options;
Folding rubber over-molded handle
Retractable extension handle
Two strong polyurethane wheels with stainless steel bearings
Certifications
IP67 (1 meter submersion for 30 minutes)
Def Stan 81-41/STANAG 4280
Key Features
Watertight, Dustproof Case
Made of Ultra-high Impact Copolymer
Office Divider Interior
Automatic Pressure Equalization Valve
Easy Open Double Throw Latches
Steel Reinforced Lock Hasp Protector
Rubber Over-molded Folding Handle
Retractable Extension Handle
Built-in Wheels
Dimensions
Interior (L×W×D)
17.10 x 7.50 x 16.00 in (43.4 x 19.1 x 40.6 cm)
Exterior (L×W×D)
19.70 x 12.00 x 18.00 in (50 x 30.5 x 45.7 cm)
Pelican 1447,WL/WD&ORG-OFFICE,BK